Tubular, ladder and back-to-back pulls. Through-glass mount, all four finishes.
Send us a photo or a part number and we’ll match it.
A glass door handle mounts back to back through holes in the glass, with one half on each side of the door. These are 304 stainless steel, fit tempered glass from 5/16" to 1/2" thick (the ladder pull takes 3/8" to 1/2"), and come with screws and gaskets.
Measure center to center, the distance between the middle of the two holes in the glass. The 6" handles need holes 6" apart; the 8" handles and the ladder pull need 8". The overall length is longer than that, so check which number a drawing gives. Every handle here mounts through 1/2" holes.
Usually. Round tubular handles go with standard hinges and clamps, and square handles suit the square hinges and 2" square clamps. Most handles come in Chrome Polished, Brushed Nickel, Matte Black and Satin Brass; each product page shows the finishes it has.
Only if the glass already has holes in the right place. Tempered glass can't be drilled after it's made, so the holes are cut before tempering. For a new door, give your glass shop the center-to-center spacing and the 1/2" hole size before they temper it.
For entrance doors, ladder pulls up to 72" are in commercial pull handles. Stock is in our Medley, FL warehouse and the quantity on each product page is live. Order by 1 PM ET for same-day dispatch, or pick up at the counter.